Knitting machines · Stoll
Stoll Cms 530 Hp W
Electronic flat machine CMS 530 HP W · CMS530HP
| Gauge | 3.53 mm · fine |
|---|---|
| Beds | two |
| Selection | electronic |
| Topology | flat |
| Segment | industrial |
Configurazione del CENTRO DI FORMAZIONE Stoll (269677 p.7), non la scheda del modello: 3 sistemi di maglia; 8 punti di pinzatura e taglio per lato (destra/sinistra); ruota di alimentazione a frizione destra/sinistra.
How to
The hands on this machine, taken from the manuals. Open the one you need.
Casting on
Putting the first row of stitches onto the needles. Everything else hangs from it: if the first row is wrong, the piece is wrong.
4 ways
not recorded for this machine
Moving stitches
Taking a stitch off its needle and putting it somewhere else: on the needle next to it, on a needle on the other bed, or a few needles in from the edge. It is the most frequent thing hands do on a machine after knitting, and every change of stitch pattern goes through it.
4 ways
not recorded for this machine
Accessories
No accessory recorded for this machine yet.
Similar machines
Coppo Finezza 12
Hand-flat V-bed2.12 mm · 472 needles
Coppo Finezza 14
Hand-flat V-bed1.81 mm · 551 needles
Coppo Finezza 8
Hand-flat V-bed3.18 mm · 315 needles
Dubied NHF5
Hand-flat V-bed2.12 mm · 567 needles
Dubied Nhf2 G14
Hand-flat V-bed1.81 mm · 551 needles
Dubied Nhf2 G7
Hand-flat V-bed3.63 mm · 276 needles